SilverCrest SSJ 150 A1 Mode D'emploi page 14

Unpacking
♦ Remove all parts of the appliance and the operating instructions from the box.
♦ Remove all packaging material.
Disposal of packaging materials
The packaging protects the appliance from damage during transport.
The packaging materials have been selected for their environmental friendliness
and ease of disposal, and are therefore recyclable.
Returning the packaging into the material cycle conserves raw materials and
reduces the amount of waste generated. Dispose of packaging materials that
are no longer needed in accordance with applicable local regulations.
NOTE
► If possible, keep the appliance's original packaging during the warranty
period so that the appliance can be packed properly for return shipment in
the event of a warranty claim.
Handling and operation
This section provides you with important information on handling and using the
appliance.
WARNING! RISK OF INJURY!
► Always unplug the appliance before fi tting or removing accessories.
Assembling and operating the appliance
■ Before using the appliance for the fi rst time, clean all component parts
thoroughly as described in the section "Cleaning and care".
■ Install the appliance in accordance with the safety instructions.
WARNING! RISK OF INJURY!
► Ensure that the plug on the power cable
sembling the appliance.
1) Place the sieve tray
on the base
│ GB │ IE
■ 10
onto the appliance base
fi t into the three slots on the underside of the sieve tray
is not in the socket before as-
so that the three catches
SSJ 150 A1
.