Transportation And Storage; Technical Data - McCulloch B33 PS Manuel D'utilisation

Masquer les pouces Voir aussi pour B33 PS:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3. Remove the guide bar and the chain.
4. Clean the oil holes and the groove.
Note: It is necessary to clean the oil holes and the
groove after each 5 hours operation.
5. Remove the burrs of the guide bar rails with a flat
file.
Note: Burrs of the guide bar rails are a usual
process when the guide bar rail wears.
6. Use a flat file to restore smooth edges and sides if
the top of the guide bar rail is rough.
Keep equipment safe during transportation to
prevent damage and accidents.
Keep the product and equipment in a dry and frost-
proof area.
Clean the product.
Engine Specifications
Cylinder displacement
Cylinder bore
Stroke
Idling speed
Maximum speed of output shaft
Maximum power speed
Maximum engine output
Spark plug
Electrode gap
Fuel tank capacity
Noise and Vibration Data
Equivalent vibration level (ahv, eq), equipped with trim-
mer attachment, left/right handle - see note 1
Equivalent vibration level (ahv, eq), equipped with brush-
cutter attachment, left/right handle - see note 1
Equivalent vibration level (ahv, eq), equipped with pole
saw attachment, left/right handle - see note 1
Equivalent vibration level (ahv, eq), equipped with hedge
trimmer attachment, left/right handle - see note 1
22

TRANSPORTATION AND STORAGE

TECHNICAL DATA

7. Replace the guide bar.
To lubricate the cutting blade (extended
hedge trimmer attachment)
For easier operation and longer life, lubricate the
cutter blades before and after each use.
Apply the oil until it goes between the two blades.
Lubricants must be non-toxic, non-hazardous, and
prevent corrosion for moving metal parts.
Replace or repair damaged components.
Use the correct protective cover on the product that
does not keep moisture.
Keep the product tightly attached during transport.
unit
B33 PS
(B33BCSMC)
3
cm
33
mm
36
mm
32
-1
min
2700-3200
-1
min
8500
-1
min
10000
-1
kW/min
0.9/7000
RCJ6Y
mm
0.65
3
cm
700
2
m/s
5.4/6.7
2
m/s
dB(A)
dB(A)
B33 PS+
(B33BCSMC)
33
36
32
2700-3200
8500
10000
0.9/7000
RCJ6Y
0.65
700
5.4/6.7
6.6/8.1
5.4/6.3
5.4/6.7
860 - 001 - 28.10.2018

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

B33 ps+

Table des Matières