JVC GV-CB3E Instructions page 8

8
CONNECTIONS (When Using JLIP Video Capture Software)
EN
Make sure all units are turned off before making any connections.
The video images will be displayed on your TV. You cannot view the images on your
computer monitor.
When connecting the provided cables, be sure to connect the terminals with core filters to
the GV-CB3 Video Capture Box.
TV (set the input
select switch to
VIDEO (EXT.IN))
Other units with
image output
connectors
Connect to the JLIP
terminal if available.
Downloaded from:
Image sources with JLIP and S-Video output connectors
To video
output
connector
https://www.usersmanualguide.com/
Connect to
AV jack-
equipped TV
To video input
or to VCR
connector
Cable adapter (provided)
If your VCR has the 21 pin AV input connector
(SCART), use the provided cable adapter.
VCR (Recording deck)
To S-Video
output
connector
Video cable
(provided)
To JLIP
connector
3.5 mm diameter 4-pole cable
(provided)
S-Video cable (provided)
Video cable (provided)