VONROC LM507XX Traduction De La Notice Originale page 5

s immediately
equally,
e rotating blades.
otating blades.
blades.
ades.
F-1
.
HEIGHT
IGHT
e.
tting blade 8 should be adjusted if the grass is not cut
es equally,
equally,
and evenly. Insert a piece of paper between the cylinder
he fixed blade 8. Turn both adjuster nuts 7 clockwise a
ght.
.
a time until the cutting cylinder 6 cuts the paper evenly
the whole blade length 8Note: The blades act like a
shears.
e cutting blade 8 should be adjusted if the grass is not cut
tting blade 8 should be adjusted if the grass is not cut
G
anly and evenly. Insert a piece of paper between the cylinder
and evenly. Insert a piece of paper between the cylinder
nd the fixed blade 8. Turn both adjuster nuts 7 clockwise a
he fixed blade 8. Turn both adjuster nuts 7 clockwise a
e at a time until the cutting cylinder 6 cuts the paper evenly
a time until the cutting cylinder 6 cuts the paper evenly
wer on the edge of the lawn and
oss the whole blade length 8Note: The blades act like a
the whole blade length 8Note: The blades act like a
turn at the end of each rurn and
r of shears.
shears.
htly over-lapping the previously cut
mower on the edge of the lawn and
wer on the edge of the lawn and
turn at the end of each rurn and
I
slightly over-lapping the previously cut
htly over-lapping the previously cut dislodaed or damaged blades, loose fttings and worn or
covers and quards are undamaged and correctly fitted.
vice.carry out the followina maintenance reqularly:Reaularly check
.carry out the followina maintenance reqularly:Reaularly check
horoughly using a soft brush and cloth.
se. dislodaed or damaged blades, loose fttings and worn or
dislodaed or damaged blades, loose fttings and worn or
h. Remove all grass and debris.
hat covers and quards are undamaged and correctly fitted.
covers and quards are undamaged and correctly fitted.
clean the blade area.
the blade area, remove with a wooden or plastic implement.
dry place out of the reach of children. Do not place other objects
ne thoroughly using a soft brush and cloth.
horoughly using a soft brush and cloth.
WWW.VONROC.COM
olish. Remove all grass and debris.
h. Remove all grass and debris.
nd clean the blade area.
lean the blade area.
9
3
4
F-2
2
3
4
H
10
11
12
J
1
2
1
1
2
3
4
8
9
5