Oster DURA PRESS 6020 Manuel D'instructions page 10

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

USING THE IRON'S SPECIAL FEATURES
The SPRAY MIST® feature is a powerful water spray mist
that dampens the fabric to aid in removing wrinkles from
heavy fabrics and for setting creases.
To use the SPRAY MIST® feature: Press the
SPRAY MIST® Button firmly.
The SHOT OF STEAM® feature provides an extra burst of steam for deep penetration
of stubborn wrinkles. You can use this feature while dry or steam ironing, but the Water
Reservoir must be at least 1/4 full of water.
To use the SHOT OF STEAM® feature: Place the Iron
on top of the wrinkle and press the SHOT OF STEAM®
Button each time you would like an extra burst of steam.
The SHOT OF STEAM® feature may be used
continuously with just a short pause between shots.
Vertical Steam and Vertical Shot of Steam
The Vertical Steam feature allows your Iron to function as a garment steamer.
TIP: When using the Vertical Steam on clothing, hang the clothing on a clothes hanger
for best results. Hanging curtains and drapes may also be steamed.
To use Vertical Steam:
1. Make sure that the Iron has heated up (2 minutes).
2. Hold the Iron in a vertical position, with the Iron close to but
not touching the fabric you want to steam.
3. With your other hand, pull the fabric tight.
4. Press the SHOT OF STEAM® Button in approximately
3-second intervals as you move the Iron across the
wrinkled area.
WARNING: To prevent the risk of burns, keep your hand
away from the area being steamed.
WARNING: DO NOT steam garments while wearing them; this may result in injuries.
Spray Mist® Feature
Shot Of Steam® Feature
9

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Dura press 6021

Table des Matières