Télécharger Imprimer la page

Sharp HT-SB140 Mode D'emploi page 34

Masquer les pouces Voir aussi pour HT-SB140:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 59
8
• Risk of product damage! Ensure that
the power supply voltage corresponds
to the voltage printed on the back or
the underside of the unit.
• Connect the mains cable to the AC~
Socket of the unit and then into a
mains socket.
Basic Operation
Standby/ON
• When you fi rst connect the unit to the
main socket, the unit will be in STAND-
BY mode. The POWER indicator will
light up red.
• Press the
button on the remote cont-
rol to switch the main unit ON or OFF.
• Disconnect the main plug from the
main socket if you want to switch the
unit off completely.
– If a TV or an external device (Only for AUX
socket) is connected, the unit will switch
on automatically when the TV or the
external device is switched on.
– When the unit has no input signal for
over 15 minutes, it will automatically
switch to Standby mode.
Select Modes
Press the
button on the unit
repeatedly or press the AUX, BT
(Bluetooth), OPTICAL, HDMI ARC buttons
on the remote control to select the
desired mode.
Red indicator: In STANDBY mode.
Green indicator: In AUX mode.
Orange indicator: In Optical mode.
Blue indicator: In Bluetooth mode.
White indicator: In HDMI ARC mode.
Adjust the Volume
– Press the + / - buttons on the unit or
press the VOL+ / VOL- buttons on the
remote control to adjust the volume.
– If you wish to turn the sound off ,
press the MUTE button on the remote
control. Press the MUTE button again or
press the VOL+ / VOL- buttons on the
unit or on the remote control to resume
normal listening.
– While adjusting the volume, the status
indicator fl ashes quickly.
– While the volume level reaches its
maximum level, if you press the VOL+
button again, the status indicator
fl ashes once. While the volume level
reaches its minimum level, if you press
the VOL- button again, the status
indicator fl ashes once.
Select Equaliser (EQ) Eff ect
• While playing, press the EQ button on
the remote control to select between
preset equalisers: Movie (recom-
mended for viewing movies), Music
(recommended for listening to music),
NEWS (recommended for listening to
NEWS).
MOVIE - LED fl ash orange
MUSIC - LED fl ash blue
NEWS - LED fl ash green
AUX/OPTICAL/HDMI ARC
1. Ensure that the unit is connected to
the TV or audio device.
2. While in ON mode, press the
button on the unit repeatedly or press
the AUX, OPTICAL, HDMI ARC buttons
on the remote control to select the
desired mode.
3. Operate your audio device directly for
playback features.
4. Press the VOL +/– button to adjust the
volume to your desired level.
TIP:
While in HDMI ARC/OPTICAL mode, if
there's no sound output from the unit
and the HDMI ARC/OPTICAL lights fl ashes
quickly, you may need to activate PCM
signal output on your source device (eg.
TV, DVD or Blu-ray player).

Publicité

loading