Electric Brake - RIDGID R4222 Manuel D'utilisation

FEATURES
CARRYING HANDLES DEPTH
CONTROL KNOB
See Figure 4.
HEAD
For convenience when carrying or transporting the miter
LOCK PIN
saw from one place to another, a carrying handle has been
provided on top of the saw along with handle areas on either
DEPTH
side of the saw base. To transport, turn off and unplug the
STOP
saw, securely tighten the slide lock knob, then lower the
saw arm and lock it in the down position. Lock saw arm by
pushing the lock pin in.
NOTE: DO NOT perform any cutting operation with the saw
CARRYING
in the locked position. "D" HANDLE HANDLE
CROWN AND BASEBOARD SETTING LEVER
The crown and baseboard setting lever is helpful when
making miter cuts between 45° right and 45° left for tall
crown molding and vertical baseboard.
DEPTH CONTROL KNOB
See Figure 4.
The depth control knob is a guide for limiting downward
movement of the saw arm.
HEAD LOCK PIN
See Figure 4.
The head lock pin is used for locking the saw arm in the
down position.

ELECTRIC BRAKE

An electric brake quickly stops blade rotation after the switch
trigger is released.
EXTENDED MITER CAPACITY
See Figure 5.
SIDE HANDLE
Rotating extension tables allow for miter cuts up to 70 .
°
AREA
LED LIGHTING SYSTEM
SAW ARM LOCKED IN DOWN POSITION
Fig. 4
The LED casts a shadow of the blade teeth onto the
workpiece for making precision cuts and predicts blade kerf
for blade cut line.
MITER LOCK LEVER
See Figure 5.
ROTATING
The miter lock lever securely locks the saw at the desired
EXTENSION
ROTATING
miter angle. Push the lever down to lock the saw in place. TABLE
EXTENSION
To release the saw, lift the miter lock lever and depress the
TABLE
miter bypass button.
MITER SCALE
The miter scale has index points at 0 , 15 , 22.5 , 31.6 , 45 , UNLOCK
° ° ° ° °
60 , and 67.5 on both the left and right side of the miter table.
° °
LOCK
MITER LOCK
LEVER
INDEX
POINTS
Fig. 5
11 - English