Electrical Connection - Wittur Servogearless WSG-S2.3 Instructions De Service

Electrical installation
5.2.3 Permissible current load at ambient temperature
1 For screw assembly with metal surface (good heat dissipation)
2 For other assembly (e.g. adhesive)
5.3

Electrical connection

NOTICE
Compare the coil voltage of the stator to the DC voltage of the installed rectifier.
INTORQ | BA 14.0197 | 04/2016
DANGER
There is a risk of injury by electrical shock!
The brake must only be electrically connected when no voltage is applied!
35