Wittur Servogearless WSG-S2.3 Instructions De Service page 65

Mechanical installation
Assembly of the rotor
Abb. 7 Mounting the hub onto the shaft
3
4
1. Push the complete rotor (3) onto the hub (4) and check whether it can be moved by hand. Do not use
any lubricant! (Exception: rotor with toothing that has been sprayed by the manufacturer.)
In the following sections, only assembly for the versions with flange will be described.
Assembly of the complete stator
Abb. 8 Mounting the complete stator
1
6
10 Cylinder head bolt
1. Push the complete stator (1) onto the shaft.
2. Screw the complete stator (1) into the bearing shield (15) using the bolts (10)
3. Remove the transport safety bolts (17) (discard).
INTORQ | BA 14.0197 | 04/2016
Complete rotor
Hub
Stator, complete
Flange
6 Flange
15 End shield
15 End shield
17 Transport safety bolt
25