Wittur Servogearless WSG-S2.3 Instructions De Service page 66

Mechanical installation
4.4.3 Check the air gap
Abb. 9 Checking "s
1.1 Stator
2
1. Check the air gap "s
"s " in the table (
LN
NOTICE
Do not insert feeler gauge more than 10 mm between armature plate (2) and stator (1.1)!
If "s " (
L
INTORQ | BA 14.0197 | 04/2016
"
L
Air gap, s
A
L
Armature plate
" near the bolts (10) using a feeler gauge and compare the values to the values for
L
16).
16) is not within the tolerance, readjust the air gap.
6 Flange
9 Sleeve bolt
10 Cylinder head bolt
15 End shield
26