ResMed S9 Serie Guide De Bienvenue page 9

Adjusting ramp time
Designed to make the beginning of treatment more comfortable, ramp time is the period during which
the pressure increases from a low start pressure to the treatment pressure. To adjust your ramp time:
1. From your HOME
screen, turn
until the RAMP
screen is displayed
in blue.
Using mask-fit
Available in S9 AutoSet and S9 Elite, mask-fit helps you fit your mask properly. This feature delivers
treatment pressure for a three-minute period, prior to starting treatment, during which you can check and
adjust your mask-fit to minimize leaks.
1. Fit your mask as described in the mask user guide.
2. From your HOME screen, push and hold
One of the following MASK FIT screens is displayed:
3. If necessary, adjust your mask, mask cushion and headgear until you have a Good mask-fit.
After three minutes, the pressure reverts to the set pressure and treatment will begin. You can end
mask-fit at any time by pressing
2. Press .
The selection is
highlighted in
orange.
for three seconds.
.
3. Turn until the
ramp time you
require is displayed.
4. Press to
confirm your choice.
7
English