Optika OPTISTAR Serie Manuel D'utilisation page 35

j) Mirror image setting
1. Press MENU on the camera to open the main menu, press DOWN to select the Mirror Image option, then press OK to
enter the Mirror Image menu.
2. Use UP and DOWN to select the Horizontal or Vertical mirror settings. Press OK to select ON or OFF, press MENU on
the camera to save and exit.
k) Date Stamp setting
1. Press MENU on the camera to open the main menu, press DOWN to select the Date Stamp option, then press OK to
enter the Date Stamp menu.
2. Use UP and DOWN to select Off, Date or Date & Time, press OK to confirm and exit.
• If you select Off, the image will not show the time at which it was captured.
• If you select Date, the image will show in overlay the date on which it was acquired.
• If you select Date & Time, the image will show in overlay the date and the time on which it was acquired.
l) System setting
1. Press MENU on the camera to open the main menu, press DOWN to select the System option, then press OK to enter
the System menu.
2. Use UP and DOWN to select Factory Reset, System Info. and Card Info.
3. When selecting Factory Reset, and pressin OK, a dialog will remind the user whether to restore the factory settings. Use
UP and DOWN to select Yes or No, press OK to confirm.
4. When you select System Info. and pressing OK again, the current version of the software is displayed. Press OK to
accept, Press MENU on the camera to return to the main menu.
5. When selecting Card Info. and pressing OK again, the current SD card information are displayed. Press OK to accept,
Press MENU on the camera to return to the main menu.
Page 35