Optika OPTISTAR Serie Manuel D'utilisation page 32

9. When the Line Thickness entry is highlighted, press OK or MODEL/AE; the line thickness can be changed. Four types
of thickness can be selected.
c) Exposure setting
1. To quickly turn off automatic exposure, long press MODEL/AE.
2. Press MENU on the camera to enter the main menu, press DOWN to move to the Exposure option, then press OK to
enter the exposure settings. You can set the automatic exposure on/off and exposure values through the menu.
3. Enter the Exposure menu as shown below. Use UP and DOWN to select the Auto option highlighting. Use OK and
MODEL/AE to select automatic exposure ON or OFF.
4. Select One push, and then press OK; the camera will perform a key exposure. After the key exposure, automatic expo-
sure will be closed.
5. Enter the Exposure menu as shown below. Select the exposure value (EV) by using UP and DOWN. Use OK and MOD-
EL/AE to adjust the corresponding value.
• NOTE: the exposure value is allowed to be adjusted only when the automatic exposure is OFF.
Page 32