Advanced Settings; System Parameters - Airzone FLEXA 3.0 Manuel D'instructions

ADVANCED SETTINGS

To access the advanced configuration menu of the Blueface and Think thermostats follow the following steps:
Blueface
ES
EN
FR
IT
Press and hold
PT
Think
Important: Use
DE
Press once
From this menu you can change the system and zone parameters.

SYSTEM PARAMETERS

• System address
your installation using this parameter. The Supermaster option
control board, AZX6CCPGAWI)
connected to the AZX6CCPGAWI in a semi-forced way:
•
Temperature range. Use this parameter to select the highest temperature in heating mode (19-30 ºC, by default 30ºC)
and the lowest temperature in cooling mode (18-26 ºC, by default 18ºC). It is also possible to disable some of the
modes.
30
to confirm and to return.
Press and hold
(not available on systems with BACnet gateway)
allows you to impose the operation mode of the system to the rest of the systems
Operation mode:
System 1
Press and hold
. Use this parameter to define the system number in
(available in installations with airzone production
Available operation modes:
Rest of the systems