Maintenance And Storage - Ribimex PRTOURBAT37 Manuel D'instructions Et D'utilisation

V. OPERATION
5.1- Intended use
This tool is desigend for indoor domestic use only (light-duty fastening and removig screws at
home). This tool is not suitable for drilling. Do not use in artisanal, commercial, professional
and/or industrial applications.
5.2- Operation
WARNING!
Before starting operation, make sure there is no utility lines (gas pipe, water pipe
or electricity cable) laying behind the working surface.
Before starting
• Check the product and accessories for sign of damage.
• Make sure the battery is sufficiently charged.
• Wear appropriate protective equipments.
• Install suitable bit onto the screwdriver.
Screw driving
• Grasp the tool firmly and place the bit on the target screw head.
• Apply moderate pressure and press a suitable operation button (3 or 5) to start with screw
driving. Excessive pressure can result in damaging the screw head and driver bit.
• WARNING! Do not force the tool. Let the tool do the work.
After use
• Check and clean the tool.
5.3- Tips
• Before driving screws in wood, a smaller hole should be made on the workpiece. This will
prevent the screw and bit from wandering over the workpiece and causing damage.
VI. MAINTENANCE AND STORAGE
WARNING!
Before any intervention on product, ensure that power is set to the "OFF" position.
Reminder: In order to maintain the machine in good working condition, carry out regular
maintenance of the machine after each use and before storage. Any breach or inadequate
maintenance reduces the life of the machine and increases the risk of breakdowns and accidents.
6.1- Cleaning
• Clean the tool with a stiff brush or a dry clean cloth. Do not use water or detergent for
cleaning.
• Never immerse the machine in water or any liquids.
6.2- Maintenance
• The tool requires no additioanl lubrication or maintenance.
• There is no user serviceable parts in the tool.
Page 11 / 18