Phosphate Removal - Lovibond Tintometer Mode D'emploi

2.7.4 Phosphate removal

This sub-module enables the user to calculate the amount of a selected
phosphate removal product needed to reduce the phosphate concentration to
the desired level.
The phosphate removers must be added and specified by the user. A brand
name should be entered as well as the quantity of product needed per volume of
water.
When the known result option is selected the expected phosphate reduction
should be entered.
When the predetermined dose option is selected a repeat dosage choice is
needed (Yes or No). The dosage quantity will be calculated related to the pool
volume and the product quantity defined at dosage.
34 Aqua MATE_2 08/2015