Chlorine Dosage - Lovibond Tintometer Mode D'emploi

2.7.1 Chlorine dosage

This sub-module enables the user to calculate the amount of a selected chlorine
donor needed to raise the free or available free chlorine concentration to the
desired level.
The chlorine donors must be added and specified by the user. A chemical should
be selected in a list containing the most commonly used chlorine donors and
whenever necessary the available active chorine concentration of the product
should be given as well as the physical appearance.
After selecting one of the existing products in the list the user needs to:
- enter the volume of pool water, if necessary,
- enter, at the user's choice, either the initial and target chlorine concentration
or only the actual increase of chlorine concentration.
- tell the application whether the pool water contains cyanuric acid or not.
When pressing the "Show dosage" button, the quantity of product needed will
appear in the text box.
31
Aqua MATE_2 08/2015