Declaration Of Conformity Ce; Electrical Connection - Seenergy Magic 60 Manuel D'instructions

electrical storms, etc..., the hood may show malfunctions or even
breakdowns, and the repair would not be covered by the warranty.
In that case, the exhaust hood shall be disconnected and the
company must contact an electrician or electrical company in order
to solve the supply problem.
•
The hood is a household appliance act to extract smoke , it can not
be used as support element of objects or utensils.
•
In the constant effort to to improve our products, we reserve the
right to make changes following their enhancement to their
technical, functional and aesthetic characteristics.

Declaration of Conformity CE

This appliance is in compliance with the following European Directives:
93/68/CE : General regulations - 2006/95/CE : Concerning low tensions
- 89/336/CE : Electromagnetic compatibility - CE Regulation n°
1935/2004:
this appliance is suitable to come in contact with food products.

Electrical Connection

•
Before connecting the appliance to the electricity supply, check that
the voltage corresponds to that on the data plate and that the power
supply cable is suitable for the appliance load also stated on the data
place.
•
If the appliance is connected directly to the mains, fit an all-pole
disconnect switch with minimum contact gap of 3 mm, adequate for
the appliance load and complying to regulations.
•
The plug used must support the power of work of the appliance.
WARNINGS
EN/4