AL-KO AK 160 Traduction De La Notice D'utilisation Originale page 12

en
MAINTENANCE
Hooking and locking mechanism
1. The hooking profile, left and right locking rails
as well as the cut-out in the attached left
and right locking plates should be cleaned of
heavy soiling and then lightly lubricated.
2. Use a rag to remove any excess grease so
that only a thin layer of grease remains.
Checking the locking cylinder for ease of mo-
vement
1. Occasionally operate the locking cylinder of
the removed safety hood and check for ease
of movement.
2. If it doesn't function smoothly, then use a spe-
cial spray for locking cylinders (available in
specialist shops).
Spare parts / Mounted parts
CAUTION!
Only use original AL-KO spare
parts!
Only use mounted parts and ac-
cessories tested and approved by
AL-KO!
A replacement key can be ordered from a specia-
list shop by providing the ETI number.
ADVICE
The ETI number is located on the safety
hood.
For the Netherlands, you will also have
to provide the safety card!
GUARANTEE / WARRANTY FOR
DEFECTS
Warranty for defects
The warranty for defects is handled according to
§10, numbers 1-7 of the general terms and condi-
tions of business of AL-KO Kober.
12
Maintenance
AL-KO SAFETY COMPACT