Samsung DVD-P191 Manuel D'utilisation page 12

connections
Connection to an Audio System (2 Channel Amplifier)
1
Using the audio cables, connect the AUDIO (red and
white) OUT terminals on the rear of the DVD player to the
AUDIO (red and white) IN terminals of the Amplifier.
2
Using the video signal cable(s), connect the
VIDEO,,COMPONENT OUT terminals on the rear of the
DVD player to the VIDEO, COMPONENT IN terminal of
your TV as described on pages 10 to 11.
3
Turn on the DVD player, TV, and Amplifier.
4
Press the input select button of the Amplifier to select
external input in order to hear sound from the DVD player.
Refer to your Amplifier's user manual to set the Amplifier's
audio input.
Note
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause
damage to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier. (See pages 25-26)
- The position of terminals can vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
1_ connections
RED
WHITE
Audio Cable
RED
WHITE