How To Use; Function Details - Srhythm NiceComfort 25NC25 Mode D'emploi

How to Use

Use ANC Function
Press the ANC Button to turn Active Noise
Cancellation ON/OFF
ANC
(the LED indicator light will be green when ANC
ON.)
Use Bluetooth Function
1.Hold the Multi-function Button for 3-5
seconds to turn headphone Bluetooth on,then
enter pairing mode.(the LED indicator light will
be blue and red flashing quickly.)
2.Start your mobile phone Bluetooth and find
headphone Bluetooth pairing name "Srhythm
NC25" to click it to pair.(the LED indicator light
3-5S
will be blue flashing slowly after paired
successfully.)
3.Hold the Multi-function Button for 3-5
seconds to turn headphone Bluetooth off.
Press to adjust volume. Long press to
skip to next/previous song.
Long press the Volume Up and Volume Down
Buttons for 5 seconds to clear the pairing.
Press the Multi-function Button to
play/pause music or answer/end call.
Double-press the Multi-function Button to
Reject an incoming call or Dial out the last call.
2
Press the Multi-function Button three times to
turn on/off the low-latency game mode.
3
5

Function Details

Easy Pairing
1. Hold the Multi-function Button for 3-5 seconds to
turn headphone Bluetooth on,then enter
pairing mode.(the LED indicator light will be blue and
red flashing quickly.)
2. Keep headphone and your mobile phone as close
as possible during pairing process.
3. Turn on your mobile phone Bluetooth. Search for
headphone Bluetooth signal on mobile phone and
click "Srhythm NC25" to pair.(the LED indicator light
will be blue flashing slowly after pairing successfully.)
4. If you are asked for a password/PIN code during
pairing procedure,please enter "0000" (four zeros).
Pair to the Second Bluetooth Device
1. Please make sure that headphone is connected to
the first Bluetooth device successfully and music is
not playing.
2. Hold the Multi-function button until the
headphone switch off and continue with the steps
"Easy Pairing"(Let the headphone re-enter pairing
mode,the LED indicator light will flash blue and red
alternately).
3. Pair headphone with the second device according
to "Easy Pairing" steps.
4. Return to the first Bluetooth device and pair it with
headphone again. Now both of your devices are
paired with headphone.
6