Pump Function - Blue Wave NP5760 Manuel D'instructions

NP5760
D. Put the patch on the damaged area and press down firmly. Allow 12 hours for repair to dry. After patch has
dried, apply glue around the edges for a complete seal (let dry 4 hours).
Chemical Floater
Part VI
1. Drainage
Check the stopper on the bottom of the pool and the drain cap. Unscrew the drain cap. Drain the water with a garden
hose. Remove the stopper on the bottom of the pool. Completely drain all water from the SPA pool.
2. Dry the Pool and Pump
Press the bubbling button to blow out the water inside the jet holes. Unplug the pump,remove the filter cartridge from the
inner wall of the pool.
3. Storage
Use a towel to wipe off the pool, dry 24 hours. Unscrew the valves to deflate the pool, fold the pool..It is recommended
that store the SPA in its original package in a warm dry place.
Part VII
Temp. setting
Bubble
Heating
10
1
Drainage and Storage

Pump Function

LED display
"Temperature Mode" button
Filter
2 3