VALBERG SBS 592 E X625C Consignes D'utilisation page 14

B
Using the appliance
Levelling door
Schematic diagram of leveling the door
List of tools to be provided by the user
wrench
Adjusting nut
Fixed shaft
Not level Left
Right
Levelling feet
Wrench
Locking nut
When the fridge door is low:
Open the door, use a wrench to loosen the locking nut and to rotate the adjusting nut anti-
clockwise. To raise the height of the door. Once the doors are aligned, then tighten the
locking nut by rotating it anti-clockwise.
When the fridge door is high:
Open the door, use a wrench to rotate the adjusting nut clockwise to lower the height of the
door. Once the doors are aligned, then tighten the locking nut by rotating it anti-clockwise.
7 EN