Safety Note - Opus Technologies LD Serie Manuel D'installation Et D'utilisation

Nom du modèle | Manuel d'installation et d'utilisation | Installation and user manual | 23

2.4 Safety note

The majority of problems with the magnetic in-
duction loop (BIM) happens when the installa-
tion has not been properly reflected so let's
take a little time before starting the installation
and gain in result and time.
Ideally, the loop amplifier should be placed near
the area to be covered. This may involve placing
the amplifier on a panel, under a desk or under
a table.
The pickup microphone should be as close as
possible to the input of the amplifier.
To position the loop in the space to be
equipped, it is important to take into account
the future users of the system.
For example, if you only need to plan the spea-
ker and the client, a loop around the desk may
be a better solution rather than a loop around
the perimeter of the room. It will limit radiation
and increase confidentiality.