Maintenance And Repair - Siemens Scio Manuel De Référence

Quick Reference Table -- Combined Display Setup
Click on the following items to execute setup functions for Com-
bined (O2/Agent/N2O) MultiGas monitoring and display.
Menu Item
Waveform
MultiGas Parameter
O2 Scale
N2O Display
Agent Display
Note: During the combined display, the N
and their selections are ghosted on the combined menu. You can only access these selections
and turn the displays off, once you have turned off the combined MultiGas parameter display.
Agent Scale
ID Override
Auto Zero Delay
1 Point Cal.
2 Point Cal.
Last O2 Cal.
O2 Alarms

Maintenance and Repair

To ensure safety, the Scio module requires routine cleaning (see
SC 7000/8000/9000XL User's Guide Chapter 26, Cleaning, Dis-
infecting, and Sterilizing). Monitoring accessories such as sam-
Page 16
The Combined (O /Agent/N
2
Description
Selects waveform for display
Enables combined MultiGas parameter
box display (see SC 7000/8000/9000XL
User's Guide Chapter 23)
Sets O waveform scale (see page 9)
2
Displays N O values in O2/N2O parame-
2
ter box (see page 11)
Displays a separate Agent parameter
box (see page 14)
O and Agent displays are automatically turned on
2
Sets Agent waveform scale
Configures Scio module to identify an
agent automatically as specified by the
user (see page 14)
Delays automatic zeroing for 5 minutes
(see page 9 for detailed information)
See page 6 for detailed information on calibration functions.
Accesses O alarms in the Alarm Limits table (see SC 7000/8000/
2
9000XL User's Guide Chapter 5)
Scio MODULE D011100
O) Setup Menu
2
Settings
• O Agent
2,
• ON, OFF
• 50 %, 100 %
• ON, OFF
• ON, OFF
• 1-20 % in increments of 1
• OFF -- Identifies agent
and displays its concen-
tration levels
• Override options:
HAL
ISO
ENF
SEV
DES
N/A
SC 7/8/9XL VF2.x