Falltech APEX Pro Wood Pole Fall Restrict Device Manuel D'instructions page 7

5.3.2 Controlling the Tail End of the Rope: The tail end of the rope must be retained to prevent tangling or interference with a gaff. FallTech
WPFRD rope tail end comes with both a sewn loop for traditional storage on a breakaway hook or a magnetic keeper system for retention.
See Figure 5 for optimal magnetic keeper location on body belt.
5.3.3 Connecting the Device to the Pole: Wrap the Neoprene Impregnated Web Strap around the back of the pole and wrap the Rope around
the front of the pole. Connect the Snap Hook into the Adjuster Eye with the gate facing downwards as shown in Figure 6 below. Always
visually confirm that the Snap Hook is fully closed and locked around the Adjuster Eye.
5.3.4 Moving the Strap Adjuster Towards the Back of the Pole: To move the Strap Adjuster back or tighten the device around the pole, pull
yourself into the pole using the brown Web Strap Handles, then pull the outside Web Strap of the Adjuster handle out and around
towards the back side of the pole. See Figure 7A. Alternately, pull yourself into the pole using the brown Web Strap Handles, then
holding your body weight forward with one hand, shove the short handle towards the back of the pole with your free hand. See Figure
7B.
MFRD01 Rev A
Figure 4: Connecting Device to Body Belt
Figure 5: Optimal Magnetic Keeper Location
Figure 6: Connecting Device to Pole
113022 7