Danfoss RET M Instructions D'installation page 12

All manuals and user guides at all-guides.com
User Instructions
GB
Display
The LCD displays actual room temperature until the setting dial
is moved.
LED Indicators
Power on - Green (left hand LED).
Thermostat output on - Red (right hand LED).
Setting the temperature
Turn setting dial to required temperature. The selected
temperature will flash in the LCD to signify it is showing set
temperature.
After a short period the display stops flashing and shows actual
room temperature.
Thermostat status (heat mode only)
A flame symbol will be lit whenever the thermostat is calling
for heat.
1