Johansson Profiler Lite 6601 Mode D'emploi page 15

Manually level setting
To set manually the level.
- Select the desired input or cluster.
- Turn the button to choose the Select Filter mode.
- Push the rotary button to enter the selected mode.
- Turn the button to select BI-II.
- Push the button to confirm.
- Turn the button to select the Manual Level mode.
- Push the rotary button to enter the selected mode.
- Turn the button to set manually the level, variable from 20 dB to 0 dB (30 dB to 0 dB for clusters).
- Push the button to confirm.
Example : setting the level of BI-II (UK version = BII)
Select Filter
Select Filter
I-II
LED is activated
Select Filter
Manual Level
Manual Level
Manual Level
Repeat this section to set all levels
15
The LED is green.
The LED is now RED colored.
III 1 2 3 4 5
UHF Clusters
The LED is green.
The LED is green.
The LED is now RED colored.
The LED is green.
6 7 8 9 10