Johansson Profiler Lite 6601 Mode D'emploi page 10

Setting channels / cluster
Each cluster has a bandwidth which can be programmed from 1 to 7 channels :
To set the channel(s) per cluster :
In the following example cluster 1 is set for channel 22 to channel 26.
- Turn the button to select the Select Filter mode.
- Push the rotary button to enter the selected mode.
- Inside the mode, turn the button to select the cluster to be set.
- Push the button to confirm.
- Turn the button to select the Start Channel mode.
- Push the rotary button to enter the selected mode.
- Turn the button to select the start channel
- Push the button to confirm.
- Turn the button to select the Stop Channel mode.
- Push the rotary button to enter the selected mode.
- Turn the button to select the stop channel
- Push the button to confirm.
Select Filter
Select Filter
I-II
Select Filter
Start Channel
Start Channel
Start Channel
Stop Channel
Stop Channel
Stop Channel
Repeat this section to set all clusters
10
Mode is indicated with
a GREEN colored LED.
The LED is now RED colored.
III 1 2 3 4 5
UHF Clusters
LED n° 1
The LED is green.
The LED is green.
The LED is now RED colored.
Display
The LED is green.
The LED is green.
The LED is now RED colored.
Display
The LED is green.
= green LED
= red LED
6 7 8 9 10