Ø8 Rod Punching; Maintenance; Spare Parts - Fapim FP16 Manuel D'instructions Et D'entretien

FP16
4.2.3 Possible Ø8 rod punching
Insert the rod to be machined as shown.
Inset the rod up to the stroke.
Push pedal to carry out rod punching.
GB

5. MAINTENANCE

It is imperative that the operations below are carried out periodically:
- Check of the feeding pressure.
- Lubrication of the tools with cutting fluid.
- Periodical clearing of the equipment.
- Protection of the parts subjected to corrosion with oil

6. SPARE PARTS

The spare parts can be requested to Fapim S.p.a directly.
It is imperative that the following data are reported:
- Machine serial number
- Year of construction
- Spare part code
38