Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
10.
Unwind the cable and insert the
plug into the wall socket of a
suitable wiring system. Unless
otherwise stated the machine
is suitable for 120V-60Hz
connection (Fig. 9).
CAUTION! We will not be liable for
any damage caused by operating
conditions with voltages other
than required! Make sure that the
plug is grounded so as to avoid
any problems with the generator
function (Fig 9).
GENERAL INFORMATION
1.
Main on/off switch
2.
Pressure gauge
3.
Steam pressure light
4.
Low water level indicator
5.
Chemical ejection indicator
6.
Steam quantity regulator
7.
Chemical switch
8.
Flexible hose connector
•
Turn on the boiler switch (1
Fig. 11); the pressure indicator
green light will flash for the time
required to reach the maximum
pressure level, after which it will
stabilize and remain on (3).
•
Absence of water inside the
tank is indicate by the flashing
of the indicator (2) and by an
acoustic signal on the dashboard.
Immediately undertake to fill
the tank.
•
After refilling the tank with
water the machine to will
return automatically to normal
functioning.
(Fig. 9)
(Fig. 10)
(Fig. 11)
13
Publicité
Table des Matières
