Before Using The Appliance For The First Time; Colour Coding; Symbols And Markings - Bosch MUZ9RV1 Mode D'emploi

en Overview
Overview
Please fold out the illustrated pages.
X Fig. A:
1 Slicing and shredding attachment
a Housing with feed chute
b Marking on housing Q
c Cover ring
d Marking on cover ring
e Drive shaft
f Foot (height-adjustable)
g Pusher
2 Inserts
a Slicing insert, thick
b Slicing insert, thin
c Shredding insert, coarse
d Shredding insert, fine
3 Bevel gear*
a Colour coding (black)
b Locking lever
c Release button
d Drive for attachment
* Special accessory
Important: The bevel gear is not included
in the scope of supply of this accessory.
The accessory should only be used with the
matching bevel gear.
If you have one of the following
accessories, the bevel gear supplied with
them can be used:
MUZ9HA1, MUZ9FW1 (meat mincer) or
MUZ9PP1 (pasta accessory).
A new bevel gear can be bought from
a retailer or requested from Customer
Service (MUZ9AD1).
8
Before using the appliance
for the first time
Before the new accessory can be used,
it must be fully unpacked, cleaned and
checked.
Caution!
Never operate a damaged accessory!
■ Remove all accessories from the
packaging and dispose of all packing
materials.
■ Check that all the parts are present and
examine them for obvious damage.
X Fig. A
■ Thoroughly clean and dry all parts
before using for the first time.
X "Cleaning and maintenance" see
page 10

Colour coding

The drives of the base unit each have
different colours (black, yellow and red).
This colour coding system can also be
found on the accessories. Only use this
accessory on the black main drive.

Symbols and markings

Symbol Meaning
Position the cover ring on
marking Q (X Fig. C 6)
Q
and turn in an anticlockwise
direction until it clicks into place
(X Fig. C 7).
Slicing and shredding
inserts
Recommended speeds
7
Slicing inserts, shredding inserts
Not suitable for use with this
r
accessory!
z