Cleaning And Maintenance; Bevel Gear - Bosch MUZ9RV1 Mode D'emploi

en

Cleaning and maintenance

12. Once you have finished work, move the
rotary switch to y. Wait until the drive
comes to a standstill. Disconnect the
mains plug.
13. Remove the pusher.
14. Rotate the cover ring in a clockwise
direction and remove.
15. Remove the insert.
16. Hold down the release button and rotate
the attachment in a clockwise direction
until it disengages.
17. Remove the attachment.
18. Open the locking lever on the bevel
gear. Rotate the bevel gear in an
anticlockwise direction and remove.
■ Clean all parts directly after use.
X "Cleaning and maintenance" see
page 10
Important: Should inserts become blocked
with food during processing, switch the
appliance off and unplug. Remove the
insert and empty. Then resume processing
from step 5.
Cleaning and maintenance
The accessories used must be thoroughly
cleaned after each use.
W Risk of injury!
– Never grasp the sharp blades and
edges of the shredding and slicing
inserts.
Caution!
– Do not use any cleaning agents
containing alcohol or spirits.
– Do not use sharp, pointed or metal
objects.
– Do not use abrasive cloths or cleaning
agents.
– Never clean the bevel gear under
running water or put in the dishwasher.
In Fig. D you will find a summary of how to
clean the individual parts.
10

Bevel gear

■ Wipe the outside of the bevel gear with
a soft, damp cloth and dry off.
Housing, foot and pusher
■ Clean all plastic parts with a detergent
solution and a soft cloth / sponge or
place in the dishwasher.
■ Allow all parts to dry.
Inserts
■ Clean inserts with a detergent solution
and a soft brush.
■ Allow all parts to dry.
Note: When processing food such
as carrots, plastic parts may become
discoloured. This can be removed with a
few drops of cooking oil.
Changes reserved.