Bimar B008.G16DY3F Notice D'instructions page 12

• Do not pull on the cord to move the appliance.
• Do not pull on the cord or the appliance itself to disconnect the
plug from the plug point.
• If the power cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
order to avoid risks.
• This appliance must not be operated by means of an external
timer or a separate remote control system, to avoid the risk of fire
if the device is covered and / or is positioned incorrectly. It must
also not be used together with another device that can
automatically turn on the unit, thus avoiding the risk of damage to
people, animals or property.
• If the appliance breaks or there is a malfunction, switch off the
appliance and have it checked by qualified personnel; repairs
carried out by unauthorised personnel may be dangerous and
nullify the guarantee.
• Ensure that the fan is switched off from the supply mains before
removing the guard.
INSTALLATION
• After removing the packing materials, check the integrity of the appliance; if you
are unsure, do not use it and ask for qualified professional help. The packing
materials (plastic bags, polystyrene foam, nails, etc.) must be kept out the reach
of children because they are potential sources of danger. Attention: any stickers
or advertising material applied to the grid removed before using the appliance.
The manufacturer declines all responsibility in case this is not safe working
practices will be respected.
• Before connecting the appliance, check that the voltage values shown on the
data plate correspond to those of the electricity supply network. In the event of
incompatibility between the electric outlet and the plug of the appliance, have
the outlet replaced with another more suitable type by professionally qualified
personnel, who will make sure that the section of the wires of the outlet is
appropriate for the absorbed power of the heater. In general, the use of adapters
or extension cords is not recommended; if their use is indispensable, they must
conform to existing safety standards and their current capacity (amperes) must
not be less that the maximum of the appliance.
Heruntergeladen von manualslib.de Handbücher-Suchmachiene
12