Publicité
Guidance and MANUFACTURER'S declaration – electromagnetic
IMMUNITY
Guidance and manufacturer's declaration – electromagnetic immunity
The Grid Pad 15 is intended for use in the electromagnetic environment specified below. The customer or the user of the Grid Pad
15 should assure that it is used in such an environment.
Immunity test
EC 60601 test level
Conducted RF
3 Vrms
150 kHz to 80 MHz
IEC 61000-4-6
6 Vrms 150 kHz to 80
MHz outside ISM bandsa
Radiated RF
10 V/m
IEC 61000-4-3
80 MHz to 2.7 GHz
NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection
from structures, objects and people.
122
Compliance level
3 Vrms
150 kHz to 80 MHz
6 Vrms 150 kHz to 80 MHz
outside ISM bandsa
10 V/m
Electromagnetic environment - guidance
Portable and mobile RF communications
equipment should be used no closer
to any part of the Models Grid Pad 15,
including cables, than the recommended
separation distance calculated from the
equation applicable to the frequency of the
transmitter.
Recommended separation distance
80MHz to 800MHz
800MHz to 2.7GHz
where P is the maximum output power rating
of the transmitter in watts (W) according
to the transmitter manufacturer and d is
the recommended separation distance in
metres(m).
Field strengths from fixed RF transmitters,
as determined by an electromagnetic site
survey, a should be less than the compliance
level in each frequency range b
Interference may occur in the vicinity of
equipment marked with the following
symbol:
Publicité
