Sharp HT-SB147 Manuel De L'utilisateur page 10

8
display (recomended for personal bass/
treble settings).
NOTE: Bass/Treble setting is
available only in custom preset.
AUX IN/OPTICAL/HDMI ARC
1. Ensure that the unit is connected to
the TV or audio device.
2. While in ON mode, press the
button on the unit repeatedly to select
the desired mode.
3. Operate your audio device directly for
playback features.
4. Press the +/– button to adjust the
volume to your desired level.
TIP:
While in HDMI ARC/OPTICAL mode, if
there's no sound output from the unit
(the display will show "InVALId"), you may
need to activate PCM signal output on
your source device (eg. TV, DVD or Blu-ray
player).
Bluetooth Operation
Pair Bluetooth-enabled Devices
The fi rst time you connect your Bluetooth
device to this player, you need to pair
your device to this player.
NOTE:
– The operational range between this
player and a Bluetooth device is
approximately 8 meters (without any
object between the Bluetooth device
and the unit).
– Before you connect a Bluetooth device
to this unit, ensure you know the
device's capabilities.
– Compatibility with all Bluetooth de-
vices is not guaranteed.
– Any obstacle between this unit and
a Bluetooth device can reduce the
operational range.
– If the signal strength is weak, your
Bluetooth receiver may disconnect,
but it will re-enter pairing mode
automatically.
1. Turn on the soundbar by pressing the
standby button.
2. Press the
button on the unit
repeatedly or button on the remote
control to select Bluetooth mode. You
are in bluetooth mode when you see
letters „nobt" on the display.
3. Enter the Bluetooth search mode on
the device you wish to connect to the
soundbar.
4. Select SHARP HT-SB147 from the list.
Your device and the soundbar will
now be connected.
– To disconnect your device, switch o
the Bluetooth connection or hold down
button, or button on the remote
control for 3 seconds.
TIPS:
• Enter „0000" for the password if
necessary.
• The player will also be disconnected
when your device is moved beyond the
operational range.
• If you want to reconnect your device
to this player, place it within the opera-
tional range.
• If the device is moved beyond the
operational range, when it is brought
back, please check if the device is still
connected to the player.
• If the connection is lost, follow the
instructions above to pair your device
to the player again.
Listen to Music from Bluetooth
Device
– If the connected Bluetooth device
supports Advanced Audio Distribution
Profi le (A2DP), you can listen to the
music stored on the device through the
soundbar' .
– If the device also supports Audio Video
Remote Control Profi le (AVRCP), you