Problems And Solutions - EUROM VT9 Livret D'instructions

PROBLEMS AND SOLUTIONS

The fan blades do not rotate even though the device is
switched on
 Is the plug in the socket?
 Is there power to the socket?
 Is button 1, 2 or 3 depressed?
 Is the blade blocked, e.g. by damage, a deformity on the grille or
a foreign object?
There is strange noise when starting
 Check to ensure the blades are placed as far over the motor axle
as possible.
 Check if there are any burrs around the edges of the blades.
 Check whether the blades have become deformed and are
touching the protective grille.
Warning: Repairs must be carried out by qualified engineers. This
also applies to replacing or repairing the electrical cable and plug.
Please request original parts if the device needs to be repaired.
If the device is subjected to modifications or repairs are carried out
by unqualified persons, the guarantees from the supplier, importer
and manufacturer will become null and void.
CE - DECLARATION
It is hereby declared by: Euromac bv., Kokosstraat 20, 8281 JC
Genemuiden that the devices below:
Make: EUROM - Model: VT9, VT12, VT16, VS16 - Description: Fan
fulfil the requirements of the Low Voltage Directive 2006/95/CE and
EMC directive 2004/108/ec and correspond to the following norms:
EN 60335-1:2012
EN 60335-2-80:2003+A1+A2
EN 62233 :2008
Genemuiden, 03-12-2014
W.J. Bakker, Gen. Dir.
15
EN 55014-1:2006+A1
EN 55014-2 :1997+A1+A2
EN 61000-3-2:2006+A1+A2
EN 61000-3-3:2008