Publicité
Using your Induction Hob
To start cooking
1. Touch the ON/OFF
After power on, the buzzer beeps once, timer control
show "
" ，heating zone selection controls show
"
"or"
"or"
hob has entered the state of standby mode.
2. Place a suitable pan on the cooking zone that
you wish to use.
• Make sure the bottom of the pan and the surface
of the cooking zone are clean and dry.
3.Touching the heating zone selection control,
and a indicator upon you touched will flash
4. Adjust heat setting by touching the slider control.
• If you don't choose a heat setting within 1
minute, the Induction hob will automatically
switch off. You will need to start again at step 1.
• You can modify the heat setting at any time
during cooking.
control.
", indicating that the induction
EN-12
Publicité
