Storage; Disposal; What If There Are Problems; Technical Data - Beurer FWM 45 Mode D'emploi

WARNING
• Only use the foot warmer again once the foot warmer and fleece insert have fully dried. Otherwise,
there is a risk of damage.

6. Storage

If you do not plan to use the foot warmer for a long period of time, we recommend that you store it in the
original packaging.
IMPORTANT
Allow the foot warmer to cool down before storing. Failure to observe this may result in damage to the
foot warmer. To avoid damaging the foot warmer, do not place any objects on top of it whilst storing.

7. Disposal

For environmental reasons, do not dispose of the device in the household waste at the end of its
useful life. Dispose of the unit at a suitable local collection or recycling point. Dispose of the device
in accordance with EC Directive – WEEE (Waste Electrical and Electronic Equipment). If you have
any questions, please contact the local authorities responsible for waste disposal.

8. What if there are problems?

Problem
The foot warmer does not warm up or the massage
function cannot be activated while:
– the mains part is connected to a working socket.
– the foot warmer controller is connected to the mains
part cable.
– both sliding switches are set to setting 2 (heat +
massage).

9. Technical data

See type plate on the foot warmer controller.
Cause
The foot warmer is
faulty.
12
Solution
Send the foot warmer
for servicing.