Kongskilde KDC 4000 Plus Manuel page 22

The cleaning brushes
are mounted at the top
left of the machine
Rain cover for gear motor - part no. 131082639
(50Hz) / 131082682 (60Hz)
The rain cover will protect the gearmotor against impact
from the weather when installed outdoor.
Kongskilde offers two types; one for 50Hz motors, and
one for 60Hz motors.
50Hz
22
60Hz
Flexible connection - part no. 131082043
As a link between a pipe system and the cleaners inlet
funnel, a flexible connection is available. This will allow
stepless height adjustment of the cleaner without dis-
mantling of any pipes. The connection can be adjusted
in height, and is equipped with a neoprene sock, to
avoid penetration of rain or snow.
Test screens
A range of hand held screens with different perforations
are available from Kongskilde. These can be used to do
preliminary cleaning tests, which will give a good guide-
line for deciding screen selection.
Screens
Furthermore, inner and outer screens are offered with
varying hole diameters, please contact Kongskilde for
further information. See also section "Screen program".
Piping for conveying of impurities
A wide range of OK 200 piping components and cy-
clones are available for conveying the impurities from
the cleaner to disposal into location for storage of impu-
rities, and to convey the crop.