Acksys AirBox WIFI V2 Guide D'installation Rapide page 34

Output Tx
power (radio
card output)
Values are given by the radio card manufacturer at ±2dB.
They must be subtracted by 2dB because of RF losses between radio card connector and antenna
connector. The values are given for 1 chain. Aggregate power is calculated by adding 3 dB for 2 chains and
4.8 dB for 3 chains.
Rx sensitivity
(radio card
input)
Values are given by the radio card manufacturer with a ±2dB tolerance.
Add 2 dB to get the value on the antenna connector.
Wi-Fi1 / dual-band 11n 2T/2R
Modes
802.11b/g
802.11a
802.11gn HT20
802.11gn HT40
802.11an HT20
802.11an HT40
802.11b
802.11b/g
802.11a
802.11gn HT20
802.11gn HT40
802.11an HT20
802.11an HT40
19 dBm @ 6M
15 dBm @ 54M
18 dBm @ 6M
15 dBm @ 54M
20.5 dBm @ 7.2 Mbps (MCS 0)
18 dBm @ 72.2 Mbps (MCS 7)
20.5 dBm @ 15 Mbps (MCS 0)
18 dBm @ 150 Mbps (MCS 7)
18 dBm @ 7.2 Mbps (MCS 0)
15 dBm @ 72.2 Mbps (MCS 7)
18 dBm @ 15 Mbps (MCS 0)
15 dBm @ 150 Mbps (MCS 7)
NA
-94 dBm @6M
-80 dBm @54M
-96 dBm @6M
-84 dBm @54M
-92 dBm @ 7.2Mbps (MCS 0)
-76 dBm @ 72.2 Mbps (MCS 7)
-90 dBm @ 15 Mbps (MCS 0)
-73 dBm @ 150 Mbps (MCS 7)
-96 dBm @ 7.2Mbps (MCS 0)
-75 dBm @ 72.2 Mbps (MCS 7)
-91 dBm @ 15 Mbps (MCS 0)
-72 dBm @ 150 Mbps (MCS 7)
- -
16
1 RF chain