Acksys AirBox WIFI V2 Guide D'installation Rapide page 32

Software
Device configuration
Firmware upgrade
SNMP
Operating mode
AP mode only
Network topology
Security
Client/Bridge mode only
Network topology
Security
Mesh mode only (supported only with 11n WiFi interface)
Network topology
Security
Power supply
Number of power supply inputs
PWR1/PWR2 source
PoE source
Power consumption
Automatic discover of the product
Built in web interface with
login/password protection
Via web browser or "WaveManager"
SNMP V2C, V3
AP (Access Point), Router, Repeater,
Bridge/Client, Mesh, WDS
Infrastructure
WEP, WPA-PSK/WPA2-PSK, WPA/
WPA2 with 802.1x authenticator, SSID
visibility status
Infrastructure, ad-hoc or mesh mode
WEP, WPA-PSK, WPA2-PSK. 802.1x
supplicant. AES/TKIP/WEP by hardware
encryption
802.11s
SAE/AMPE
3, PWR1, PWR2 and PoE
9 to 48VDC protected against wire
inversion
5-ways terminal block connector
802.3af /802.3at type 1 class 3 on LAN2
Feature available from V2 version of the
product
AirBox/10 : Average consumption
between 2,1 et 6W. Recommended
power supply 7W.
AirBox/12 : Average consumption
between 2,7 et 11W. Recommended
power supply 15W.
- -
14