Technical Data - Eaton Ex ResistTel IP2 Mode D'emploi

4 Technical Data

Connection data
Power supply
Voltage PoE
PoE
Voltage external power supply
Power requirement
Switching power of the relays
Connection Ethernet
Ringing volume
Housing
Material
(Height x Width x Depth)
Weight
Display
Keypad
Hook switch
Operation general purpose
Handset
Mouthpiece
Receiver inset
Sling holder
Handset cable
Environment conditions
Operation environment
Transport and storage temperature
Air humidity
Conformities
18
Power over Ethernet refer to IEEE 802.3af
or external power supply
48V DC (Min. 44V, Max. 57V). The power
has to be transmitted at 10/100 Mbit/s
Ethernet connections only with the unused
pairs of data lines.
Class 0
19.2 V – 52.8 V DC
12.95 W
250 V, 5 A, 100 VA AC
230 V, 0.5 A, 100 W DC
50 V, 1 A, DC
30 V, 5 A, 100 W DC
Terminals (10/100 Mbit/s)
Max. 95 dB(A) in 1 m distance
Glass-fibre reinforced polyester
267 x 225 x 132 mm
without cable glands and without earth bolt
ca. 6.0 kg
• 182 x 64 pixel
• Field of view ca. 78 mm x 26 mm
• Metal keypad with ice protection
• 21 keys with ABC marking
Reed contact without mechanical switch
Vertical wall mounting. The telephone must
be mounted on a closed rear panel.
Electret-foil microphone
Dynamic receiver inset with magnetic field
generator
Integrated adjustable sling holder
Steel armoured cord
optional curly cord
-40°C...+60°C steel armoured cord
-30°C...+60°C curly cord
-40°C...+80°C according to EN/IEC60721
75 %