Information; Service; Care And Maintenance; Disposal - Eaton Ex ResistTel IP2 Mode D'emploi

3 Information

3.1 Service

The telephone contains no serviceable parts.

3.2 Care and Maintenance

The telephone is maintenance-free. Still, if the operating area is highly contaminated
by dust, fat, oil etc., the telephone should be cleaned from time to time.
The telephone may only be cleaned using a damp cloth in order to avoid electrostatic
charging.
Never use sharp objects for cleaning.
During maintenance, check accessible seals for function, e.g. regarding possible
damage or positioning. If the seals are damaged, operating the telephone is not
allowed. Damaged seals must be replaced.

3.3 Disposal

The complete telephone
telephone is disassembled, plastics, metals and electronics components are to be
disposed of separately. In every single case the national requirements and
regulations for waste disposal must be observed.

3.4 Warning and Security Instructions

This telephone is an explosion proof and weatherproof telephone especially for use in
a harsh industrial environment.
14
should be disposed of as electronic waste. When the
The telephone is suitable for use in Group II, Category 2G and 2D or
non-hazardous locations only.
Do not disconnect the telephone unless power has been removed or
the area is known to be non-hazardous.
EXPLOSION HAZARD