Power Supply Poe According To Ieee 802.3 Af (Not Intrinsically Safe); Lan Interface 10/100 Base-Tx According To Ieee 802.3 (Not Intrinsically Safe); Potential-Free Relay Contacts (Not Intrinsically Safe) - Eaton Ex ResistTel IP2 Mode D'emploi

1.4.2 Power Supply PoE according to IEEE 802.3 af (not
intrinsically safe)
Terminal no.: 11, 12, 14, 15
U = DC 24 ... 48 V
n
U = DC 57 V
m
I = 100 A
sc
For the LAN connection it is only allowed to use cables of the type CAT5e or higher.
To observe the EMC rules with netting shielded cables have to be used.
Using a power supply via PoE it is only allowed to use the unused data cable
pairs of a 10/100 Mbit/s Ethernet cable for the power.
1.4.3 LAN Interface 10/100 BASE-TX according to IEEE 802.3
(not intrinsically safe)
Terminal no.: 8, 9, 10, 13
U = ±2.5 V (10 BASE-TX)
n
respectively
U = ±1 V (100 BASE-TX)
n
U = ±7 V
m
U = DC 57 V
m
For the LAN connection it is only allowed to use cables of the type CAT5e or higher.
To observe the EMC rules with netting shielded cables have to be used.
1.4.4

Potential-free Relay Contacts (not intrinsically safe)

Terminal no.: 18, 20 respectively no.: 21, 23
U
AC 250 V
For this connection cables with a transversal section of 1.5 mm² to 4 mm² are
allowed to be used only.
6
max
I
max
5 A
P
max
100 VA