Your Vacuum Cleaner; Replacement Parts And Special Accessories; Initial Use - Siemens VS Z4 Mode D'emploi

en
Please keep this instruction manual. When passing the
vacuum cleaner on to another person, please also hand
over this instruction manual.
Fold out the picture pages.

Your vacuum cleaner

1 Adjustable floor tool (with locking collar)*
2 Hard-floor brush (with locking collar)*
3 Hose hand grip
4 Flexible hose
5 Telescopic tube with sliding switch
(and locking collar)*
6 Telescopic tube with adjusting sleeve
(and locking collar)*
7 Power cord
8 Parking aid
9 Locking lever
10 Exhaust grille
11 Dust bag
12 Exhaust filter*
13 Motor protection filter, washable
14 Carrying handle
15 Dust bag compartment lid
16 Dust bag change indicator*
17 Storage aid (on underside of appliance)
18 On/off button and power controller
19 Accessories holder for multi-purpose nozzle*
20 Multi-purpose nozzle*
21 Drill dust nozzle*
Replacement parts and special
accessories
A Replacement filter pack
To get the most out of your appliance, we recom-
mend using PowerProtect genuine replacement bags.
Contents:
• 4 dust bags with fasteners
• 1 micro-hygiene filter
We therefore recommend that you only use our origi-
nal dust bags.
Your appliance is a highly efficient vacuum cleaner
that achieves excellent cleaning results when used
with high-quality dust bags.
Only by using high-quality dust bags (such as
Siemens original dust bags) can you ensure that
your vacuum cleaner is working at the energy effi-
ciency class, dust pick-up rate and dust retention
capacity listed on its EU energy label.
The use of inferior-quality dust bags (e.g. paper
bags) can have a negative effect on the service life
and performance of your appliance.
Using unsuitable or inferior-quality dust bags can
also damage your vacuum cleaner.
Such damage is not covered by our guarantee."
You can find more information about this at
www.siemens-home.bsh-group.com/dust-bag. You
can order our original vacuum cleaner bags here.
B Hard floor brush VZ123HD
For vacuuming hard floors
(parquet, tiles, terracotta, etc.)

Initial use

1
Figure
Push the handle onto the flexible hose and lock it in
place.
2
Figure
a)Push the flexible hose adapter into the air intake
opening in the vacuum cleaner lid until it locks in
place.
b)To remove the flexible hose, press the two catches
together and pull out the hose.
3*
Figure
a)Push the hand grip into the telescopic tube. To
remove it, turn the hand grip slightly and pull it out of
the tube.
b)Push the hand grip into the telescopic tube until it
engages.To release the connection, squeeze the
collar sleeve and pull the handle out.
4*
Figure
a)Insert the telescopic tube into the connecting piece
of the floor tool. To release the connection, turn the
tube slightly and pull it out of the floor tool.
b)Push the telescopic tube into the connecting piece of
the floor tool until it locks in place. To release the
connection, press on the locking collar and pull out
the telescopic tube.
5
Figure
Move the adjusting sleeve/slider button in the direc-
tion of the arrow to unlock the telescopic tube and
adjust it to the length required.
6*
Figure
Attach the accessories holder to the multi-purpose
nozzle and clip it onto the suction pipe/telescopic
tube.
* depending on model
25