Removing Nozzle, Contact Tip, And Adapter, Changing Liner, And Cleaning Gun Casing - Hobart Welding Products BETA-MIG 2510 Manuel Du Propriétaire

4-7. Removing Nozzle, Contact Tip, And Adapter, Changing Liner, And Cleaning Gun
Casing
1 2
3
3/8 in
Lay gun cable out
straight before installing
new liner.
Liner
Stickout
Tools Needed:
3/8 in
OM-194 430 Page 22
All manuals and user guides at all-guides.com
Head
Tube
Remove nozzle,
contact tip, adapter,
and wire outlet guide.
Remove
liner.
3/4 in
(20 mm)
Y Turn off welding power
1
2
3
.
Cut off wire and disconnect
gun from feeder.
Reassemble gun in
reverse order from
taking it apart.
.
Thread wire according to
welding power source/wire
feeder manual.
source/wire feeder.
Nozzle
Contact Tip
Adapter
Wire size stamped on tip –
check and match wire size.
Blow out
gun casing.
Install
Liner
Ref. ST-800 797-C