09
Additional information
Resetting the system
Use the front panel controls to reset all system
settings to the factory default.
•
With the system on, press
ON while holding down
The next time you switch on, all the system
settings should be reset.
Setting the Key Lock
You can disable the front panel buttons by
switching the Key Lock feature on.
1
With the system in standby, press SETUP
and use
to choose KEYLOCK then press
ENTER .
This is shown in the front panel display.
2
Use
to select LOCK ON or LOCK OFF
then press ENTER .
Using the language code list
Some of the language options (see Language
settings on page 27) allow you to set your
preferred language from any of the 136
languages in the Language code list below.
1
Select 'Other Language'.
2
Use
to select either a code letter or
a code number.
3
Use
to select a code letter or a code
number.
See the Language code list (next page) for a
complete list of languages and codes.
44
En
STANDBY/
USB.