HC Cargo Quad Rear 7 Série Manuel D'utilisation page 7

GB
5. Reverse priority setting:
6. T-DELAY setting:
7. System Setting:
8. Language:
The priority of the 4 triggers can be changed as request.
Priority1>Priority2>Priority3>Priority4
Reverse priority setting up isn't available if there is X near the
narrow.
Default delay time for each CH is 0S, you can set the delay
time after trigger's stopping.
The delay time can be: 0S, 5S, 10S, 15S, 20S, 25S, 30S
Noted:
If the display mode is turned off, this setting is useless.
During the trigger delay time, the keys can't work.
Auto Bright:
ON: The display can automatically adjust the brightness
according to external environment
OFF: The function off
Ruler Ref Line mode:
ON: The line always shows in the single CH image (B/L/R/F).
Trig: Only show when the single CH (B/L/R/F) is triggered.
OFF: No ref. line.
The ref. line works only when there is a video signal input, it
doesn't work if no signal or in multi-image display mode.
The default language is English, much language optional:
English, Chinese, French, Dutch, Italian, Spanish, Danish,
Russian, Polish and German.
Note: Click EXIT to save the setting.
7 7
161051 161051
Vedpak 205_Version 1_08.2015 Vedpak 205_Version 1_08.2015