HC Cargo Quad Rear 7 Série Manuel D'utilisation page 6

GB
III. OSD Menu Operation
1. Picture
Channel reverse setting
2.
3. Channel Switch
4. Trigger setting
Note: The Keys can't work when the system is in
The default value of Brightness, contrast and saturation is
50.
Hue is 0.
The Brightness, contrast and saturation value is between
0-100,
the Hue value is between -5 ~ 5.
Set each channel image normal or mirror.
Picture set the whole picture up-side down.
↑↓
There are 9 display modes: Single image (F, B, L, R), Dual
image(F/B, L/R), Triplex image(B/L/R), Quad image(
The six modes in the menu can be set on/off as request.
Single image (B,F) and Dual image(F/B) modes are always on.
Each trigger cable can trigger any one of the 9 display
modes.
Trigger function isn't available if there is X near the narrow.
6 6
161051 161051
田/
trigger.
Vedpak 205_Version 1_08.2015 Vedpak 205_Version 1_08.2015
H)